• December 3, 2022

How To Put Lights On A Dirt Bike Without A Battery – Complete Guide

How To Put Lights On A Dirt Bike Without A Battery

The headlight of a dirt bike is as important as your engine and other important parts of your dirt bike. Having good headlights means not having to worry about drive dirt bikes at night. The one question remains in mind that How to put lights on a dirt bike without a battery?

What I mean by good lighting is having lights that will work well even if the environment is foggy, or if you are riding in rainy weather. So, What’s the message here? can you start a dirt bike without a battery? or how to put a headlight on a dirt bike without a battery?

 As well, you will probably be forced to push your dirt bike overnight and the worst-case scenario is that if you meet any police and they don’t see you doing that, you might be got to jail after being put in danger for your life and other passengers around you. So, this question often arises in mind that how to put light on a dirt bike without a battery? 

Let’s start now: How to Put Lights on A Dirt Bike Without A Battery

So, It is the most asked question how to put lights on a dirt bike without a battery. There is a lot of lighting option out there but LED lighting is one of the best options here. 

How to Put A Headlight on A Dirt Bike Without A Battery

Similarly, It is important to note that a dirt bike does not include a charging system or battery as a fact. How does light energy work on a dirt bike? In fact, it is very simple, your light will be energized by magneto.

I will show you a step-by-step guide on how to install lights on your dirt bike without a battery. However, for the final results, it is important to have the right tools because if you do not have them, light can cause more damage than can be repaired.

Best Way to Put Lights on A Dirt Bike Without Batteries?

How to put lights on a dirt bike without a battery? Installing LED lights is an easy and fun way to make a unique statement with your motorcycle, and the question solved step that how to do the finished product will look awesome. So, after you buy an LED light kit you like or buy LED strips to design your own, you can easily install them on your dirt bike.

Steps to Do in How to Put Lights on A Dirt Bike Without A Battery

For example, First, you should manage all the tools and pieces of equipment that you need in the installation of lights on your dirt bike.

There are a lot of tools that might confuse you to choose the best one if you are a beginner. 

Similarly, you will need the right tools to install the lights, otherwise, you can cause irreparable damage to your dirt bike. You need to make sure that the dirt bike is properly mounted on the surface and that all engines are turned off to know How to put lights on a dirt bike without a battery? 

To avoid incidents you should “hung” or properly enlarged this. Safety comes first, so this is what you will need to do before starting any of these. As a rider, you always faced the question that can you start a dirt bike with headlights without a battery.

Gathers All The Tools For How to Put Lights on A Dirt Bike Without A Battery

First, you have to gather all the tools and equipment you needed for this question that how to put lights on a dirt bike without a battery?

Pliers:

Two booths will come ready to remove parts of locks or other cord coverings that you may use. So, What you do basically with filters is squeezing them into the cable cover and pull. That will ensure that the wire you are interested in is displayed. Some of you may think you can use your teeth but don’t do this, two pairs are needed to do this. How to put lights on a dirt bike without a battery is tricky work to do.

Combined Covered Wire: 

Likewise, Installing a headlight on a dirt bike without a battery is necessary to connect to a power source. The location of the power sources may vary from the light placed on the bike.

It, therefore, needs to be connected using wires. You will need to use a wire separated by a plastic wire to make wires with a power source.

So, Make sure you buy a wire that has different colors inside such as red, yellow, blue, and black. If you use a colored wire then it can be easy for you to see the positive terminal and the negative terminal.

Spanner: 

The spanner will fit properly in hand when you need to remove the seat and lower the fuel tank. So, by doing this you will need to turn the nuts, so obviously you will need a spanner of the right size.

To determine the size of your dirt bike spanner you will need to check it out first.

Bolts:

To install bike lights, you need measuring tools and they need to be secured to the bike. For strengthening purposes we usually use bolts. When you turn on the bike lights you need to adjust them with good power. To strengthen it you need nuts and bolts. It is tricky to put lights on a dirt bike without a battery

Even a small Bolt with a good combination of materials can be used for very hard durability.

Wire installation:

To put lights on a dirt bike without a battery,  you work with electricity, right? Therefore, you will have to do some wiring. Make sure all wires you find are different colors as that will determine which wire is for what purpose.

Basically, if you want to make changes in the future, you’ll be able to see which wire is working for what purpose, so make sure you have black, and red cords.

Driller:

Putting lights on a dirt bike without a battery needs some holes to do in your bike and for this purpose, all you need is a good driller.

You may have to make some holes in areas where you want to pass through the lights of your dirt bike. Therefore, a driller is a perfect tool for making these kinds of things, and only a driller can hold such holes that don’t look useless.

Rectifier: 

Using a rectifier, you can convert magneto’s alternating current (AC) to 12V current directed current (DC).

Bullet Connectors: 

Bullets will help you to put lights on a dirt bike without a battery. These will facilitate wired connections.

Double Handler: 

You can’t keep lights on continuously you need to turn it off again. You need a handle button to perform this task. It is called a double handle switch because you can add one light if necessary.

It can be used to switch from one light to another depending on the circumstances. The great advantage of this handle switch is that it provides you with a center to add a single light.

You can adjust the double handler switch to put lights on a dirt bike without a battery.

It can be adjusted to any side of the handle according to your choice which is why it is called the handle switch. And because of this, it has two variations and is called a double bar switch.

The rider can easily access the switch on or off depending on his or her preference at any time.

LED Lighting: 

No tools required if you do not have LED. This is the light you are going to put on your dirt bike, precisely, it should not be too focused but also not in the center.

It should be placed in a place dignified enough to bring a great light.

Step By Step Installation:

I will guide you through the process step-by-step on how to put lights on your dirt bike without a battery.

Although to get the final results, it’s essential for you to have the right tools because if you don’t, the light can cause damage that can be beyond repair.

Step 1: Remove Seat And Gas Tanks:

It is the first step that explains how to put lights on a dirt bike without a battery.

Before you start wiring, it is necessary to remove the seat and gas tank. After uninstalling you can access the path to Magneto by using cables inside it and connecting it to Magneto.

Now you need a spanner to remove the bolts. I already told you that you need to have all the sizes of spanners so you can get the exact size you can use with the same size of bolt. Spanner will not fit Bolt size then you have to adjust it.

Before, when assembling all the tools first you need to check your Bolt size.

If the Bolt size is too large, you will have to use a larger panel and if the size will be smaller then you should use a smaller panel size.

The seat is bolted tight so you need to remove this Bolt and remove it after which you can remove the seat and reach the tank, now for each one you have to carefully remove both of these items and keep them special in place. After doing the wiring, you can put it back on as it was.

Step 2: Put Your Light on The Dirt Bike:

It explains the second step how to put lights on a dirt bike without a battery.

First, you need to find a good place to fix your lights. You need to make sure that you are in the best position to let the light fall on your way. Now you have to fix it with the bolts you set.

Step 3: Adjust The Double Handlebar Switch:

It’s the third step that explains how to put lights on a dirt bike without a battery.

So, The next task is to install a double switch on the handlebars. It is up to you to decide if you should adjust your left hand to the right of the handle. 

After installing it, the second thing you should do is install the regulator or rectifier at the bottom of the gas and adjust it using bolts. Then put the gas tank back in its original position.

Step 4: Put The Lights Without A Battery:

It is the fourth step that explains how to put lights on a dirt bike without a battery

So, At Magneto there will be two wires that will come out with a yellow color. Now you have to connect both wires with a regulator or rectifier. You have to connect between two wires and there will be one wire of black and red color. You see a connector block that will be attached to it.

Now, add the negative current to the negative side and then the positive switch to the input and from the output switch, you must connect to one side of the light. As we have already said about the character links in the tools, Connect to the incoming call light up with a letter connector.

The double handle switch has three wires installed and all have their own purpose. There are three different colors black, blue and brown. Similarly, Connect the black and green wire to the wire from the controller and the black wire that you must connect to the lamp. Now finally attach the Bullet connectors before going to light so you are about to run out.

Step 5: Install All The Things And Checkout All:

It is the last and final step that explains how to put lights on a dirt bike without a battery

Now replace the seat. Get your spanner and use a tightening screw to tighten it properly. Now you have to remove the Dirt Bike from the stand and bring it up.

When you have to check if the lights are working or not. Finally, you are ready to embark on a journey through the darkest night and, at any rate, you are ready to move on.

The conclusion:

So now you have immense knowledge about How to put lights on a dirt bike without a battery?

in the final analysis, you have a complete guide about how to put lights on a dirt bike without a battery. If you have read from the beginning, then you already have a clear idea of ​​the process of how to put lights on a dirt bike without a battery. And now you don’t forget about any accident after riding in the evening or at night.

This process does not require an expert in engineering, you can do it by hand using this article. how to put lights on a dirt bike without a battery It won’t bother you anymore because you’ve found the final solution to it. I hope and fully expect this guide to prove helpful and have answered questions and dispelled any questions you may have about how to put light on your bike without batter

Leave a Reply

Your email address will not be published. Required fields are marked *